posted
i bought an old hydro someone did a crappy paint and fiberglass job on (inside)...over spray thick and thin and glass strands sticking up all over the place plus its real dirty been out side for years( I have already washed and wire brushed it to death) .. anyway places that i need to get to are hard to get to .....can you blast them lightly with some type of media .....or am I gonna just half to cut the top off of the boat.....and sand away...???
Posts: 84 | From: austin texas 78749
| IP: Logged |
posted
actually u can blast .... with walnut shells ....im not kidding.... they use pulverized walnut shells as blasting media ...nuts huh?
I just want to get the paint overspray and dirt out of the exposed cloth so i can lay new cloth over it ...
ive got a 60 grit sanding wheel to get the heavy woven roven matt off the floor....what an nut job .dont kow what this guy was thinking... he just layed a 6x8 pcs from vdrive to stern and over the stringers....horrible job lots of exposed fibers....this is som heavy shit .. its like the mat used on the inside of our 70's model 31ft bertram....
Posts: 84 | From: austin texas 78749
| IP: Logged |
UBBFriend: Email this page to someone!
![[Wink]](wink.gif)
Printer-friendly view of this topic
